To specify a bespoke dining table, start with the room, not the table: measure the space, subtract about 160 to 200 cm from each side for chairs and walkways, and that gives you the largest top that will fit. Then allow 60 to 70 cm of table edge per person, a width of 90 to 100 cm, and choose the shape, top material and base that suit how you actually use the table.
A bespoke table is worth it when standard sizes leave you with an awkward gap, a table that blocks the garden doors, or a finish that does not quite match your kitchen. The flip side is that you have to make every decision yourself. This guide takes you through those decisions in the order that makes them easiest, with sizes and a checklist you can use before you contact a maker.
Step 1: work out the maximum size from your room
Every seated person needs space behind their chair to stand up. Allow at least 80 cm between the table edge and the nearest wall or cabinet on every side where chairs will stand, and 100 to 120 cm where people need to walk behind someone who is seated.
That gives a simple formula:
- Maximum table length = room length − 160 cm (tight) or − 200 cm (comfortable)
- Maximum table width = room width − 160 cm (tight) or − 200 cm (comfortable)
A dining area of 380 × 290 cm can therefore take a table of about 180 × 90 cm with comfortable walkways, or 220 × 100 cm if you accept a tighter fit. If one long side sits against a bench or a wall without chairs, you only need to subtract the space you want to keep on that side.
Step 2: match the length to the number of seats
Allow 60 cm of table edge per person for everyday meals and 70 cm if you like generous place settings or use carvers (dining chairs with arms). On a rectangular table, add 10 to 20 cm if someone also sits at each end.
| Seats | Rectangular | Oval | Round (diameter) |
|---|---|---|---|
| 4 | 120–140 × 80–90 cm | 140 × 90 cm | 100–120 cm |
| 6 | 160–180 × 90–100 cm | 160–180 × 100 cm | 130–150 cm |
| 8 | 200–220 × 100 cm | 200–220 × 100–110 cm | 160–180 cm |
| 10 | 240–260 × 100–110 cm | 240 × 110 cm | not recommended |
| 12 | 280–300 × 110–120 cm | not recommended | not recommended |
Width matters as much as length. At 80 cm, plates fit but serving dishes struggle. At 90 to 100 cm there is room for dishes down the middle, which is why most family tables end up in this range. Above about 110 cm, passing food across the table becomes awkward unless the table is also very long.
Height is usually 75 to 77 cm. What matters is the gap between the seat and the underside of the top, which should be about 25 to 30 cm. Check this if you already own your chairs.
For round tables specifically, our round dining table size guide goes into diameters and bases in more detail.
Step 3: choose the shape
- Rectangular makes the best use of a long, narrow room and seats the most people per metre. The Rotterdam dining table with spider base is 180 × 100 cm in a black oak-look finish, a classic size for six to eight.
- Oval gives you the length of a rectangle with softer ends, so it is easier to walk around and one more chair often fits at each end. The Danish Oval dining table with Tweety base measures 160 × 100 cm with a travertine-look HPL top.
- Round suits square rooms and households of four to six. Nobody sits at the head of the table and conversation is easier. Above roughly 160 cm the centre becomes hard to reach.
If you entertain only a few times a year, an extending table can save space for the rest of the year. Measure the room for the fully extended size, though, not only the everyday one.
Step 4: pick the top material honestly
This is where descriptions can be misleading, so it helps to know what you are actually buying. A wood-look or stone-look finish is not solid wood or natural stone, and a good maker will tell you which is which.
| Top material | What it is | Good for | Keep in mind |
|---|---|---|---|
| Wood veneer | A thin layer of real wood on a stable board | Natural grain, warm look, large tops that stay flat | Treat it like wood: wipe up spills and use mats for hot pans |
| Oak-look or walnut-look finish | A decor finish with a printed wood grain | Consistent colour, easy care | It is not solid wood, so it cannot be sanded down |
| HPL (high-pressure laminate) | A hard, layered surface bonded to the top | Family life, children, frequent use; also available in a travertine look | A stone look is not natural stone; it is lighter and less sensitive to stains |
| Lacquered MDF | A smooth board finished in paint lacquer | Organic shapes and almost any colour | Looks seamless; avoid dragging heavy items across it |
| Glass | A glass top on a separate base | A light look in a small room | Shows fingerprints; feels cooler to the touch |
| Solid oak (selected models) | Solid timber | People who want real wood throughout | Ask which models are available in solid oak before you decide |
If you are torn between walnut and oak tones, a model such as the Isabella dining table in a walnut-look finish shows how a darker wood tone changes a room. For stone, we have written a separate comparison of travertine-look HPL and real travertine (in Dutch).
Step 5: choose the base
The base decides how many chairs genuinely fit and how the table looks from across the room.
- Four legs at the corners: the most stable and the easiest to sit at on the long sides, but the corners are blocked.
- Central pedestal or spider base: frees up legroom, so you can squeeze in an extra chair. Check where the arms of a spider base end up, as on our round Spider dining table (Ø130 cm).
- Two pedestals or sled legs: a good choice for long tables, with open space along both sides.
You can combine a top and a base in different colours, for example a light top on a black base.
Checklist: what to send a maker before ordering
- ☐ Room length and width, plus the position of doors, windows, radiators and any kitchen island
- ☐ How many people eat at the table every day, and how many on special occasions
- ☐ Your preferred shape, plus a second choice
- ☐ Top material and colour (a photo of your flooring or kitchen helps)
- ☐ Base style and colour
- ☐ Height of your chairs if you are keeping them
- ☐ Any access limits on the way in: stairs, narrow hallways or a lift
Tape the outline of the table on the floor before you confirm the size. Put your chairs around it and walk past a few times. Ten minutes with masking tape avoids most sizing mistakes.
Frequently asked questions
What is a good size for a bespoke dining table for 6 people?
For a rectangular table, 160 to 180 cm long and 90 to 100 cm wide. For a round table, a diameter of 130 to 150 cm. Leave at least 80 cm clear around the table.
How wide should a dining table be?
Between 90 and 100 cm for most homes. That leaves space for serving dishes in the middle while people can still pass things across.
Is a bespoke dining table made from solid wood?
Not always. Many bespoke tables use wood veneer, HPL or lacquered MDF on a stable board, and some models are available in solid oak. Ask the maker exactly which material a quote is based on.
Can I choose a different top and base combination?
Yes. With a made-to-measure table you choose the size, top, base and colours, and every detail is confirmed in writing before production starts.
Do you deliver bespoke dining tables to the UK?
We deliver everywhere – message us on WhatsApp for the details for your address.
Can I see the finishes before ordering?
You can visit our showroom in Hengelo in the Netherlands at weekends: Saturday 10:00–18:00 and Sunday 12:00–17:00. Otherwise, send us a message and we will help you compare finishes.
Planning a bespoke dining table?
Browse our full range of dining tables, then send us your room measurements and the look you have in mind. We make the table to your size and finish, directly as the manufacturer.
Get in touch with us on WhatsApp or via our contact page.